It consists of a speed regulating motor (or variable frequency speed regulation), a conveyor belt, and a chain (or conveyor roller). What should be noted here is the issue of speed adjustment. The curing speed should be considered from two aspects: one is full curing, and the other is curing at the optimal speed. The best speed selection method is to first pass the product through the UV curing device at a certain speed, and if cured, accelerate the speed until the ink layer of the product that passes through the UV curing device cannot cure. Multiplying the speed by 0.8 at this time is the optimal speed. In addition, attention should also be paid to the usage time of the lamp tube, as the speed should also be slowed down as the energy used by the UV lamp decays.
